|    Mon to Fri: 08:00am - 4:30am

Need a quick response?

If you need to get a quick response about any of our services, 
use this form and we'll aim to respond within 24 hours.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

CNC Milling Machines
3 & 4 Axis Machined Components

CNC Milling Machines

Our Milling machines enable the manufacture of instrument gear boxes, motor plates, cover plates and housings. Our most challenging work is multi axis work on universal joints, yokes and splined couplings.

Many of the components that Newmont make are part of an actuation mechanism. Milled features are often accurately timed to spline or gear teeth. Newmont has the expertise to measure the geometric and positional parameters between milled features and gears or splines.

The production of prismatic components is supported by three coordinate measuring machines (CMM) in our inspection department. Newmont has a well equipped tool room that is able to manufacture fixtures to locate and hold the most complex components.

Our machines are installed to high specifications that include high pressure coolant / through spindle coolant, thread milling and the facility for wireless data transfer from our database.

CNC programming can be done on the machines or off line using our CAM system (Edgecam).  

Take a look at the primary machinery we use in our Milling section:

CNC Milling

Capacity

Configuration

1 - Fadal VMC 3016 Vertical
30 x 16 x 20 inches
4 Axis. Vertical
1 - Fadal VMC 2216 Vertical
22 x 16 x 20 inches
4 Axis. Vertical
2 – Okuma Genos 460
30 x 18 x 18 inches
4 Axis. Vertical
1 – Hurco VM10
533 x 406 x 483mm
4 Axis. Vertical
1 – Haas VF1
508 x 406 x 508mm
4 Axis. Vertical
1 – Haas VF2
762 x 406 x 508mm
4 Axis. Vertical
View the full primary plant machinery list